ABOUT_TEXT=Written by Mario De Weerd
seesite@bt747.org
This application allows control of the many types of GPS Logger devices.
Full control using Bluetooth must sometimes be enabled by applying a hardware hack.
You can find information on the web. ABOUT_TITLE=About BT747 BT747Main.DownloadProgressBar.toolTipText=Indicates how the download is progressing.
The progress might reduce if there is more data in the data than initially reported. BT747Main.DownloadProgressLabel.text=Download progress BT747Main.GPSDecodePanel.border.title=GPS Device Data BT747Main.btApplySBAS.text=Set BT747Main.btColdStart.text=Cold Start BT747Main.btConnect.text=Connect BT747Main.btDownloadFromNumerix.toolTipText=Support for these devices was added but never validated. BT747Main.btDownloadIBlue.toolTipText=Download from the indicated devices. BT747Main.btErase.text=Erase only BT747Main.btErase.toolTipText=Only erase the GPS logger's memory, (discard any changes to format made here and retain existing GPS logger format. BT747Main.btFactoryResetDevice.text=Factory Reset BT747Main.btFormat.text=Set Format Only BT747Main.btFormat.toolTipText=Change the logged fields in the GPS Logger,
do not erase the GPS logger memory. BT747Main.btFormatAndErase.text=Set Format & Erase BT747Main.btFormatAndErase.toolTipText=Set the selected format and erase the memory of the GPS Logger BT747Main.btHotStart.text=Hot Start BT747Main.btLogByApply.text=Set BT747Main.btOutputFile.toolTipText=The basename of the output file.
The date/time identifier will be added,
and the extension depends on the selected output format. BT747Main.btRawLogFile.text=Raw Log File : BT747Main.btRawLogFile.toolTipText=The source file, also used to write to when downloading.
\nFor download, define a .bin (most cases) or .sr (phototracker) file.
\nThe input format can be .bin, .nmea, .csv or .trl. BT747Main.btRecoverMemory.text=Try to recover faulty memory BT747Main.btSetFlash.text=Set BT747Main.btSetHoluxName.text=Set BT747Main.btSetNMEAFileOutput.text=Set BT747Main.btSetNMEAOutput.text=Set BT747Main.btSetNMEAOutputDefaults.text=Defaults BT747Main.btWarmStart.text=Warm Start BT747Main.btWorkingDirectory.text=Output Folder : BT747Main.btWorkingDirectory.toolTipText=The folder where the reports will be written. BT747Main.cbAddTrackPointComment.text=Add Track Point Info BT747Main.cbAddTrackPointName.text=Add Track Point Name BT747Main.cbAdvancedActive.text=Activate Common Filter BT747Main.cbAdvancedActive.toolTipText=Must be ticked for these filters to be applied. BT747Main.cbAzimuth.text=Azimuth BT747Main.cbDAGE.text=DAGE BT747Main.cbDGPSType.toolTipText=Type of position correction to use - RTCM is probably not useful, WAAS also activates EGNOS BT747Main.cbDSTA.text=DSTA BT747Main.cbDisableLoggingDuringDownload.text=Disable logging while downloading BT747Main.cbDistance.text=Distance BT747Main.cbElevation.text=Elevation BT747Main.cbFileAzimuth.text=Azimuth BT747Main.cbFileDAGE.text=DAGE BT747Main.cbFileDSTA.text=DSTA BT747Main.cbFileDistance.text=Distance BT747Main.cbFileElevation.text=Elevation BT747Main.cbFileFixType.text=GPS Fix Type BT747Main.cbFileHDOP.text=HDOP BT747Main.cbFileHeading.text=Heading BT747Main.cbFileHeight.text=Height BT747Main.cbFileLat.text=Latitude BT747Main.cbFileLong.text=Longitude BT747Main.cbFileMilliSeconds.text=Milliseconds BT747Main.cbFileNSAT.text=NSAT BT747Main.cbFilePDOP.text=PDOP BT747Main.cbFileRCR.text=RCR BT747Main.cbFileRCR.toolTipText=Log reason (such as: time, speed, distance, button press) BT747Main.cbFileSID.text=SID BT747Main.cbFileSNR.text=SNR BT747Main.cbFileSpeed.text=Speed BT747Main.cbFileUTCTime.text=UTC Time BT747Main.cbFileVDOP.text=VDOP BT747Main.cbFixType.text=GPS Fix Type BT747Main.cbGGAOut.text=GGA Period BT747Main.cbGGAOut1.text=GGA Period BT747Main.cbGPXTrkSegWhenSmall.text=New track segment after unselected position BT747Main.cbGPXTrkSegWhenSmall.toolTipText=When selected, creates track segments whenever a logged position is not selected as a trackpoint. BT747Main.cbGRSOut.text=GRS Period BT747Main.cbGSAOut.text=GSA Period BT747Main.cbGSAOut1.text=GSA Period BT747Main.cbGSTOut.text=GST Period BT747Main.cbGSVOut.text=GSV Period BT747Main.cbGSVOut1.text=GSV Period BT747Main.cbGoodFixColor.text=Good Color BT747Main.cbGoodFixColor.toolTipText=Good Color BT747Main.cbHDOP.text=HDOP BT747Main.cbHeading.text=Heading BT747Main.cbHeight.text=Height BT747Main.cbHeightOverMeanSeaLevel.toolTipText=Correct the logged height (altitude).
MTK loggers store the height as the altitude relative to the WGS84.
When activated, write height relative to the mean sea level. BT747Main.cbImperialUnits.text=Imperial Units BT747Main.cbImperialUnits.toolTipText=Convert values to inches, feet, mph, ... . BT747Main.cbIncludeTestSBAS.text=incl. Test SBAS BT747Main.cbIncludeTestSBAS.toolTipText=Includes WAAS/EGNOS satellites that are in test mode. BT747Main.cbLat.text=Latitude BT747Main.cbLong.text=Longitude BT747Main.cbMilliSeconds.text=Milliseconds BT747Main.cbNSAT.text=NSAT BT747Main.cbNoFixColor.text=Bad Color BT747Main.cbNoFixColor.toolTipText=Bad Color
Make sure the bad color is the same as the good color
if you want to limit the HTML file size.
The 'bad color' is used to indicate track sections with unselected positions. BT747Main.cbNotApplyUTCOffset.text=Do not apply UTC offset BT747Main.cbOtherFormat.border.title=Other BT747Main.cbPDOP.text=PDOP BT747Main.cbPortName.toolTipText=The system identifier or path of the port.
Select a port from the list or type the port directly. BT747Main.cbRCR.text=RCR BT747Main.cbRCR.toolTipText=Log reason (such as: time, speed, distance, button press BT747Main.cbRecordNumberInfoInLog.text=Add position index BT747Main.cbRecordNumberInfoInLog.toolTipText=Write the position index (record number) of each position to the log file. BT747Main.cbSID.text=SID BT747Main.cbSNR.text=SNR BT747Main.cbSerialSpeed.toolTipText=The speed of the serial port
Should not matter for Bluetooth ports. BT747Main.cbSpeed.text=Speed BT747Main.cbTrkButton.text=Button BT747Main.cbTrkDGPS.text=DGPS BT747Main.cbTrkDistance.text=Distance BT747Main.cbTrkEstimate.text=Estimate BT747Main.cbTrkFRTK.text=FRTK BT747Main.cbTrkManual.text=Manual BT747Main.cbTrkNoFix.text=No fix BT747Main.cbTrkPPS.text=PPS BT747Main.cbTrkRTK.text=RTK BT747Main.cbTrkSPS.text=SPS BT747Main.cbTrkSimulate.text=Sim BT747Main.cbTrkSpeed.text=Speed BT747Main.cbTrkTime.text=Time BT747Main.cbTrkUser1.text=User BT747Main.cbTrkUser10.text=User 10 BT747Main.cbTrkUser11.text=User 11 BT747Main.cbTrkUser12.text=User 12 BT747Main.cbTrkUser2.text=User 2 BT747Main.cbTrkUser3.text=User 3 BT747Main.cbTrkUser4.text=User 4 BT747Main.cbTrkUser5.text=User 5 BT747Main.cbTrkUser6.text=User 6 BT747Main.cbTrkUser7.text=User 7 BT747Main.cbTrkUser8.text=User 8 BT747Main.cbTrkUser9.text=User 9 BT747Main.cbType8Out.text=Type 8 (?) BT747Main.cbType9Out.text=Type 9 (?) BT747Main.cbUTCTime.text=UTC Time BT747Main.cbUseSBAS.text=Use SBAS BT747Main.cbUseSBAS.toolTipText=Enables WAAS/EGNOS use. BT747Main.cbVDOP.text=VDOP BT747Main.cbVTGOut1.text=VTG Period BT747Main.cbValidFixOnly.text=Valid Fix Only BT747Main.cbValidFixOnly.toolTipText=This works only on the more recent models. Only positions with a fix will be logged to the device if activated. BT747Main.cbWayButton.text=Button BT747Main.cbWayDGPS.text=DGPS BT747Main.cbWayDistance.text=Distance BT747Main.cbWayEstimate.text=Estimate BT747Main.cbWayFRTK.text=FRTK BT747Main.cbWayManual.text=Manual BT747Main.cbWayNoFix.text=No fix BT747Main.cbWayPPS.text=PPS BT747Main.cbWayRTK.text=RTK BT747Main.cbWaySPS.text=SPS BT747Main.cbWaySimulate.text=Sim BT747Main.cbWaySpeed.text=Speed BT747Main.cbWayTime.text=Time BT747Main.cbWayUser1.text=User BT747Main.cbWayUser10.text=User 10 BT747Main.cbWayUser11.text=User 11 BT747Main.cbWayUser12.text=User 12 BT747Main.cbWayUser2.text=User 2 BT747Main.cbWayUser3.text=User 3 BT747Main.cbWayUser4.text=User 4 BT747Main.cbWayUser5.text=User 5 BT747Main.cbWayUser6.text=User 6 BT747Main.cbWayUser7.text=User 7 BT747Main.cbWayUser8.text=User 8 BT747Main.cbWayUser9.text=User 9 BT747Main.ckLogDistanceActive.text=Distance BT747Main.ckLogSpeedActive.text=Speed BT747Main.ckLogTimeActive.text=Time BT747Main.infoTextArea.text=Below are informational messages that can help during debug.\n------------------------------------------------\n BT747Main.lbAbove.text=above BT747Main.lbBaudRate.text=Baud Rate BT747Main.lbConversionTime.text=conversion Time BT747Main.lbConversionTime.toolTipText=The time spent for the last conversion. BT747Main.lbDeviceType.text=Device BT747Main.lbDistanceEvery.text=every BT747Main.lbDistanceFltr.text=<= distance <= BT747Main.lbDistancePeriodM.text=m BT747Main.lbFirmWare.text=FirmWare: BT747Main.lbFixEvery.text=Fix every BT747Main.lbFixMs.text=ms BT747Main.lbFlashInfo.text=FlashInfo: BT747Main.lbFlashZDA.text=ZDA Period BT747Main.lbFromDate.text=From BT747Main.lbGLLOut.text=GLL Period BT747Main.lbGLLOut1.text=GLL Period BT747Main.lbGeoid.text=Geoid : BT747Main.lbHDOPLimit.text=HDOP <= BT747Main.lbHoluxName.text=Holux Name: BT747Main.lbIgnore0Values.text=Values that are 0 are ignored BT747Main.lbKMH.text=km/h BT747Main.lbLanguage.text=Application Language BT747Main.lbLanguage.toolTipText_1=Set the application language (usually like en, us, fr, de).
The application must be restarted to take the new setting into account. BT747Main.lbLatitude.text=Latitude : BT747Main.lbLoggerSWversion.text=Logger SW: BT747Main.lbLongitude.text=Longitude : BT747Main.lbMemoryUsed.text=Memory used: BT747Main.lbMinPause.text=min. pause BT747Main.lbMinutes.text=min BT747Main.lbModel.text=Model: BT747Main.lbNMEAFileGGA.text=GGA BT747Main.lbNMEAFileGLL.text=GLL BT747Main.lbNMEAFileGRS.text=GRS BT747Main.lbNMEAFileGSA.text=GSA BT747Main.lbNMEAFileGST.text=GST BT747Main.lbNMEAFileGSV.text=GSV BT747Main.lbNMEAFileMALM.text=MALM BT747Main.lbNMEAFileMCHN.text=MCHN BT747Main.lbNMEAFileMDBG.text=MDBG BT747Main.lbNMEAFileMDGP.text=MDGP BT747Main.lbNMEAFileMEPH.text=MEPH BT747Main.lbNMEAFileRMC.text=RMC BT747Main.lbNMEAFileType10.text=Type 10 (?) BT747Main.lbNMEAFileType11.text=Type 11 (?) BT747Main.lbNMEAFileType12.text=Type 12 (?) BT747Main.lbNMEAFileType8.text=Type 8 (?) BT747Main.lbNMEAFileType9.text=Type 9 (?) BT747Main.lbNMEAFileVTG.text=VTG BT747Main.lbNMEAFileZDA.text=ZDA BT747Main.lbNMEAOutType10.text=Type 10 (?) BT747Main.lbNMEAOutZDA.text=ZDA Period BT747Main.lbNSATFltr.text=<= NSAT BT747Main.lbNewTrackAfter.text=New Track after BT747Main.lbNoFileExt.text=without the file extension BT747Main.lbPDOPMax.text=PDOP <= BT747Main.lbPeriodMALM.text=MALM Period BT747Main.lbPeriodMCHN.text=MCHN Period BT747Main.lbPeriodMCHN.text=MCHN Period BT747Main.lbPeriodMDBG.text=MDBG Period BT747Main.lbPeriodMDGP.text=MDGP Period BT747Main.lbPeriodMEPH.text=MEPH Period BT747Main.lbPeriodType11.text=Type 11 (?) BT747Main.lbPeriodType12.text=Type 12 (?) BT747Main.lbRMCOut.text=RMC Period BT747Main.lbRMCOut1.text=RMC Period BT747Main.lbRecNbrFltr.text=<= rec nbr <= BT747Main.lbSerialSpeed.text=Speed: BT747Main.lbSpeedFltr.text=<= speed <= BT747Main.lbTime.text=GPS Time : BT747Main.lbUpdateRate.text=Update Rate (Hz) BT747Main.lbVDOPLimit.text=VDOP <= BT747Main.lbVTGOut.text=VTG Period BT747Main.pnCommonFilter.border.title=Common Filter BT747Main.pnCommonFilter.toolTipText=Filter conditions applied to trackpoints and to waypoints. BT747Main.pnConvert.border.title=Convert BT747Main.pnDateFilter.border.title=Date filter BT747Main.pnDownload.border.title=Download BT747Main.pnDownloadMethod.border.title=Download method BT747Main.pnFileNMEAOutput.border.title=NMEA File Settings BT747Main.pnFileNMEAOutput.toolTipText=NMEA output file specific.
Selects packet types to write to NMEA files.
Not all packet types are available. BT747Main.pnFileOutputFields.border.title=File Output Fields and Items BT747Main.pnFileOutputFields.toolTipText=Select the fields that must be written to the output files. BT747Main.pnFilePosition.border.title=Position BT747Main.pnFilePrecision.border.title=Precision BT747Main.pnFileReason.border.title=Reason BT747Main.pnFileSatInfo.border.title=Sat Info BT747Main.pnFileTime.border.title=Time BT747Main.pnFiles.border.title=Files BT747Main.pnFilterOther.border.title=Other BT747Main.pnFilterPrecision.border.title=Precision BT747Main.pnFlashSettings.border.title=Flash settings BT747Main.pnFlashSettings.toolTipText=Settings used by the GPSlogger when it lost power.
Can only be changed when 'Times Left' is not 0. BT747Main.pnGPSStart.border.title=GPS Start BT747Main.pnGPXFileSettings.border.title=GPX File Settings BT747Main.pnGPXFileSettings.toolTipText=GPX File output specific settings. BT747Main.pnHoluxSettings.border.title=Holux M241 specific BT747Main.pnLanguage.border.title_1=Language BT747Main.pnLogBy.border.title=Log by . . . BT747Main.pnLogBy.toolTipText=The conditions used by the GPSlogger to store a position. BT747Main.pnLogFormat.border.title=Log Format BT747Main.pnLogFormat.toolTipText=Select the data that the GPS logger should store for each position. BT747Main.pnNMEAOutput.border.title=NMEA Output Settings BT747Main.pnNMEAOutput.toolTipText=The NMEA packets sent by the device.
At least one sentence is needed to maintain Bluetooth communication.
RMC and GGA are the most common ones,
GSA is needed if you wish to have real time satellite information. BT747Main.pnPosition.border.title=Position BT747Main.pnPrecision.border.title=Precision BT747Main.pnReason.border.title=Reason BT747Main.pnSBAS.border.title=SBAS BT747Main.pnSatInfo.border.title=Sat Info BT747Main.pnSeparation.border.title=Separation BT747Main.pnTime.border.title=Time BT747Main.pnTrackPoints.border.title=Track & Way Points BT747Main.pnTrackpoint.border.title=Trackpoint Filter BT747Main.pnTrackpoint.toolTipText=Defines which positions are considered as trackpoints. BT747Main.pnTrkFixType.border.title=Fix Type (Valid) BT747Main.pnTrkLogReason.border.title=Log Reason (RCR) BT747Main.pnVarious.border.title=Various BT747Main.pnWayPointFix.border.title=Fix Type (Valid) BT747Main.pnWayPointRCR.border.title=Log Reason (RCR) BT747Main.pnWaypoint.border.title=Waypoint Filter BT747Main.pnWaypoint.toolTipText=Defines which positions are considered as waypoints. BT747Main.tfOutputFileBaseName.text=OutputBase BT747Main.tfRawLogFilePath.text=RawFile BT747Main.tfTrackSeparationTime.text=0 BT747Main.tfTrackSeparationTime.toolTipText=The time needed between two successively logged positions
to determine that a new track must be started. BT747Main.tfWorkDirectory.text=WorkFolder BT747Main.title=BT747 Application BT747Main.txtDistanceMax.text=0 BT747Main.txtDistanceMin.text=0 BT747Main.txtFirmWare.text=Unknown BT747Main.txtFixPeriod.text=0 BT747Main.txtFlashBaudRate.text=Unknown BT747Main.txtFlashInfo.text=Unknown BT747Main.txtFlashInfo.toolTipText=Flash identification code. BT747Main.txtFlashTimesLeft.text=Unknown BT747Main.txtFlashUpdateRate.text=Unknown BT747Main.txtGeoid.text=Unknown BT747Main.txtHDOPMax.text=0 BT747Main.txtHoluxName.text=Unknown BT747Main.txtHoluxName.toolTipText=Only for certain Holux devices such as the Holux M-241.
Give a name to the device. BT747Main.txtLatitude.text=Unknown BT747Main.txtLogDistanceInterval.text=0 BT747Main.txtLogSpeedInterval.text=0 BT747Main.txtLogTimeInterval.text=0 BT747Main.txtLoggerSWVersion.text=Unknown BT747Main.txtLoggerSWVersion.toolTipText=The SW version of the device.
BT747Main.txtLongitude.text=Unknown BT747Main.txtMemoryUsed.text=Unknown BT747Main.txtModel.text=Unknown BT747Main.txtNSATMin.text=0 BT747Main.txtPDOPMax.text=0 BT747Main.txtRecCntMax.text=0 BT747Main.txtRecCntMin.text=0 BT747Main.txtSpeedMax.text=0 BT747Main.txtSpeedMin.text=0 BT747Main.txtTime.text=Unknown BT747Main.txtTimeEvery.text=every BT747Main.txtTimeSeconds.text=seconds BT747Main.txtTimeSplit.text=Time split: BT747Main.txtTimeSplit.toolTipText=Time (hours:minutes) corresponding to the start time on the 'from' date and the end time on the day following the 'to date'. BT747Main.txtTimeZone.text=TimeZone BT747Main.txtTimesLeft.text=Times Left BT747Main.txtVDOPMax.text=0 BT747_Application=BT747 Application BUILD=Build: CANCEL=Cancel CANCEL_BUTTON=Cancel CHANGE_LOG_FORMAT_TEXT=You will change the format of your device without erasing the log.
Other software might not understand the data in your device!

Do you agree to this incompatibility? CONFIRM_ERASE_BUTTON=Confirm erase COULD_NOT_OPEN_FILE=Could not open
CSV_Description=Comma Separated Value (.csv) Choose_Working_Directory=Set Output Folder Choose_the_color_for_a_'bad_track'_(pure_blue_to_ignore)=Choose the color for a 'bad track' (pure blue to ignore) Choose_the_color_for_a_'good_track'_(pure_blue_to_ignore)=Choose the color for a 'good track' (pure blue to ignore) Compe_Description=CompeGPS (.TRK,.WPT) Connect=Connect DEFAULT_DEVICE=Default DPL700_Description=Phototracker and similar files (.sr) Daylight_Savings_Time=Daylight Savings Time Disconnect=Disconnect DownloadProgessBar=DownloadProgessBar ERASE_BUTTON=Erase ERASE_WARNING_1_TEXT=You are about to erase your device.
LOG ERASE? ERASE_WARNING_2_TEXT=This is your last chance to avoid erasing your device.
LOG ERASE? ERASE_WARNING_TITLE=Confirm log erasure ERROR_TITLE=Error Everything_in_one_file=Everything in one file FACT_RESET_TEXT=You are about to perform a factory reset of your GPS Logger Device.

Do you confirm this reset at your own risk ??? FACT_RESET_TITLE=Confirm factory reset FLASH_LIMITED_TEXT=The number of writes to the flash is limited
and a change in settings could render your device inoperable
(e.g., a baud rate change)
ABORT by clicking cancel!! FORMAT_ERASE_WARNING2_TEXT=This is your last chance to avoid erasing your device.
LOG FORMAT CHANGE & ERASE? FORMAT_ERASE_WARNING_TEXT=You are about to change the logging format of your device.
and ERASE the log
LOG FORMAT CHANGE & ERASE? Fail_=Fail GMAP_Description=Google Map (.html) GPX_Description=GPX (.gpx) GPX_ForOSMDescription=GPX for OSM upload (.gpx) KML_Description=KML (.kml) KMZ_Description=KMZ (.kmz) KNOWN_Description=All known log types (.bin, .nmea, .gpx, .txt, .log, .nme, .nma, .trl, .csv, .sr, .result) Keep_Height=Keep Height LICENSE_TEXT=Software is provided 'AS IS,' without a warranty of any kind.

ALL EXPRESS OR IMPLIED REPRESENTATIONS AND WARRANTIES,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT,
ARE HEREBY EXCLUDED.
THE ENTIRE RISK ARISING OUT OF USING
THE SOFTWARE IS ASSUMED BY THE USER.
See the GNU General Public License for more details. LICENSE_TITLE=Disclaimer and license information Log_download_&_Convert=Log download & Convert MSL_to_WGS84=MSL to WGS84 NMEA_Description=NMEA (.nmea) NMEA_FilterDescription=NMEA files (.nmea, .txt, .log, .nme, .nma) NO_FILES_CREATED=No output files were created!

This usually means that either:
- The filter did not select any points
- The log does not contain any data

Try selecting all points.
If that does not work,
it may be a bug. No=No No_DGPS=No DGPS OK=OK OVERWRITE_DATA_QUESTION=The current raw data file is not empty,
and, the data in the GPS Logger is different!!!

DO YOU CONFIRM OVERWRITING THE CURRENT DIFFERENT DATA? OVERWRITING_DATA=OVERWRITING DATA OZI_Description=OziExplorer (.PLT, .WPT) One_file_per_day=One file per day One_file_per_track=One file per track OutputFileChooser=OutputFileChooser Overwrite_when_full=Overwrite when full PROBLEM_READING=Problem reading
Problem_in_Apply_Log_conditions_-_probably_non-numeric_value=Problem in Apply Log conditions - probably non-numeric value Problem_opening_file=Problem opening file Problem_with_UTC_offset=Problem with UTC offset RTCM=RTCM RawFileChooser=RawFileChooser Select_the_basename_of_the_output_file.=Select the basename of the output file (or Filename Prefix). Set=Set SetRawLogFile=Set Raw Log File SetWorkDir=Set Output Folder Set_basename=Set Output Filename Prefix Standard_Time=Standard Time Stop_when_full=Stop when full Success_=Success TRL_Description=Holux Utility Track Log files (.trl) The_application_could_not_open_=The application could not open ' Time_to_convert\:_=Time to convert: USB=USB USB_Port=USB Unknown_DATUM=Unknown DATUM Unknown_DGPS_Mode=Unknown DGPS Mode WAAS=WAAS WAITING_ERASE_TEXT=Wait until the erase is done.
You can cancel waiting (at your risk). WAITING_ERASE_TITLE=Waiting for erase. WARNING_TITLE=Warning WGS84_to_MSL=WGS84 to MSL WRITE_FLASH_BUTTON=Write Flash While_adding_ports=While adding ports WorkDir=WorkDir WorkingDirChooser=WorkingDirChooser YES_BUTTON=Yes Yes=Yes _check_if_loc_exists='.
Check if the location exists and is writeable in_case_it_is_an_output_file.=in case it is an output file. m=m RECORDS_ESTIMATED=\ records estimated BT747Main.miExit.text=Exit BT747Main.cbLoggingActive.text=Logging Active TABLE_Description=Table in GUI ImageTablePanel.lbInformationMessage.text=The functionality here is still under development - not all functions are finished ImageTablePanel.btTagFromFile.text=Tag From File ImageTablePanel.btTagFromTable.text=Tag From Table ImageTablePanel.tfDestinationDirectory.text=jTextField1 ImageTablePanel.btClearList.text=Clear ImageTablePanel.btSelectDestinationDir.text=Destination Folder: FilesToTagPanel.title=Files To Tag ImageTablePanel.btSelectImages.text=Add Files FilesToTagChooser=Select Files SelectFilesToTag=Select Files JPEG_Description=Jpeg files FileTablePanel.btSaveTaggedFiles.text=Save Tagged Files FileTablePanel.lbHour.text=h FileTablePanel.lbMinutes.text=min FileTablePanel.pnTimeOffset.toolTipText=Time offset versus the GPS time (= time zone). FileTablePanel.pnTimeOffset.border.title=Time Zone. FileTablePanel.btSelectImages.toolTipText=Add files to the list. Any file type is allowed. Only images will be tagged. Other files will be referenced in KML, HTML when possible. FileTablePanel.btClearList.toolTipText=Clear the list of files. FileTablePanel.btSaveTaggedFiles.toolTipText=Save the geoposition to the files if possible (e.g., for jpeg files). BT747Main.cbLoggingActive.toolTipText=Current logging status.
When unticked, the device is not currently logging positions. FileTablePanel.lbSeconds.text=sec BT747Main.cbDownloadMethod.toolTipText=Normal download: will download only up to the current write position in the GPS logger
Smart download: will download what is needed (some artificial intelligence)
Full download: will get the entire memory contents. BT747Main.cbDisableLoggingDuringDownload.toolTipText=The device will stop logging while download is ongoing.
On some devices this impacts download performance.
You may want to activate this simply because the logged information is not useful for you during that time. BT747Main.btConvert.toolTipText=Perform the log conversion into the indicated log format. BT747Main.cbFormat.toolTipText=The log format to convert to. BT747Main.cbGPSType.toolTipText=The device type must be known to perform the log conversion if the 'raw log file' is used.
Holux M-241 and GPSport 245 logs (.bin files) require this setting for successful transformation in all cases. AdvancedDeviceSettingsPanel.jButton1.text=Set Bluetooth Address AdvancedDeviceSettingsPanel.jButton1.toolTipText=Allows you to restore the Bluetooth address after upgrading the firmware for example. AdvancedDeviceSettingsPanel.tfBluetoothMacAddress.text=XX:XX:XX:XX:XX:XX AdvancedDeviceSettingsPanel.tfBluetoothMacAddress.toolTipText=The Bluetooth Mac Address must be specified as XX:XX:XX:XX:XX:XX
This is 6 times XX where XX is a hex number (0-9&A-F) AdvancedDeviceSettingsPanel.pnBluetoothMacAdr.border.title=Bluetooth AdvancedDeviceSettingsPanel.pnBluetoothMacAdr.toolTipText=Bluetooth setting. DeviceSettingsPanel.btStoreSettings.text=Store DeviceSettingsPanel.btStoreSettings.toolTipText=Store the current volatile settings.
This button is active only when all volatile settings are retrieved from the device. DeviceSettingsPanel.pnVolatileSettings.toolTipText=Some settings in the device are lost after a power cycle
These buttons allow you to store the current volatile settings to restore them later DeviceSettingsPanel.pnVolatileSettings.border.title=Volatile Settings DeviceSettingsPanel.btRestoreSettings.toolTipText=Restore the volatile settings that were previously stored
This button will be active only if you have stored them in the past. DeviceSettingsPanel.btRestoreSettings.text=Restore DOWNLOAD_FULL=Full download DOWNLOAD_FILLED=Normal download DOWNLOAD_INCREMENTAL=Smart Download FileTablePanel.cbOverridePositions.text=Override positions FileTablePanel.pnTagOptions.border.title=Tag options FileTablePanel.jLabel1.text=Max time diff: FileTablePanel.lbSeconds1.text=sec FileTablePanel.tfMaxTimeDiff.text=300 FileTablePanel.tfMaxTimeDiff.toolTipText=Max difference between adjusted file's time and GPS time to apply the position tag. FileTablePanel.cbOverridePositions.toolTipText=When ticked will change the current position based on GPS tracklog vs. time matches. map.tabTitle=Map Track.tabTitle=Track WayPoints.tabTitle=WayPoints SelectCacheDirectory.tooltip=Set the cache folder for the map. SetCacheDir.button=Set Cache Folder CacheDirChooser=Exception while choosing cache folder. BT747Main.btGPX.text=GPX BT747Main.btKML.text=KML BT747Main.btKMZ.text=KMZ BT747Main.btCSV.text=CSV BT747Main.btHTML.text=HTML BT747Main.btNMEA.text=NMEA BT747Main.btGPX.toolTipText=Convert to GPX BT747Main.btKML.toolTipText=Convert to KML BT747Main.btKMZ.toolTipText=Convert to KMZ BT747Main.btCSV.toolTipText=Convert to CSV BT747Main.btHTML.toolTipText=Convert to HTML BT747Main.btNMEA.toolTipText=Convert to NMEA BT747Main.startDate.toolTipText=Start date for filter BT747Main.endDate.toolTipText=End date for filter BT747Main.spTimeSplitHours.toolTipText=Start/End Hour BT747Main.lbBusySpinner.text= OutputSettingsPanel.cbLanguageChooser.toolTipText=The language of the interface. OutputSettingsPanel.cbLanguage.toolTipText=The language code of the interface. OutputSettingsPanel.lbLanguage.toolTipText=The interface language is updated after a restart. OutputSettingsPanel.lbLanguage.text=Language: BT747Main.miMapCacheDir.text=Set Map Cache Folder Stop_Convert.text=Abort BT747Main.miMapnik.text=OpenStreetMap (Mapnik) BT747Main.miOsmarender.text=OpenStreetMap (Osmarender) BT747Main.miMap.text=Map LogOperations.tabTitle=Log operations FileTablePanel.lbBusySpinner.text= BT747Main.mnSiteLink.text=BT747 Site TAB_TITLE_None=None TAB_TITLE_Image_path=Image path TAB_TITLE_Width=Width TAB_TITLE_Height=Height TAB_TITLE_Geometry=Geometry TAB_TITLE_Latitude=Latitude TAB_TITLE_Longitude=Longitude TAB_TITLE_File_Date_Time=File Date/Time TAB_TITLE_File_Date=File Date TAB_TITLE_File_Time=File Time TAB_TITLE_Tag_Date_Time=Tag Date/Time TAB_TITLE_Tag_Date=Tag Date TAB_TITLE_Tag_Time=Tag Time TAB_TITLE_GPS_Date_Time=GPS Date/Time TAB_TITLE_GPS_Date=GPS Date TAB_TITLE_GPS_Time=GPS Time TAB_TITLE_Log_time=Log time TAB_TITLE_Log_Dist=Log Dist TAB_TITLE_Log_speed=Log speed TAB_TITLE_NS=N/S TAB_TITLE_EW=E/W TAB_TITLE_Record_nbr=Record nbr TAB_TITLE_UTC_Value=UTC Value TAB_TITLE_Valid=Valid TAB_TITLE_Height_m=Height (m) TAB_TITLE_Height_ft=Height (ft) TAB_TITLE_Speed_kmh=Speed (km/h) TAB_TITLE_Speed_mph=Speed (mph) TAB_TITLE_Heading=Heading TAB_TITLE_DSTA=DSTA TAB_TITLE_DAGE=DAGE TAB_TITLE_PDOP=PDOP TAB_TITLE_HDOP=HDOP TAB_TITLE_VDOP=VDOP TAB_TITLE_NSAT=NSAT TAB_TITLE_Fix=Fix TAB_TITLE_SID=SID TAB_TITLE_VOX_File=VOX/File TAB_TITLE_RCR=RCR TAB_TITLE_RCR_Description=RCR Description TAB_TITLE_MS=MS TAB_TITLE_Distance_m=Distance (m) TAB_TITLE_Distance_ft=Distance (ft) BT747Main.btToolLogOps.text= BT747Main.btToolFilesToTag.text= BT747Main.btToolMap.text= BT747Main.btToolTrack.text= BT747Main.btToolWaypoints.text= BT747Main.btToolOutputSettings.text= BT747Main.btToolFilter.text= BT747Main.btToolDeviceSettings.text= BT747Main.btToolAdvancedDevSettings.text= BT747Main.btToolAdvFileSettings.text= BT747Main.btToolInfo.text= BT747Main.btToolLogOps.toolTipText=Log Operations BT747Main.btToolFilesToTag.toolTipText=Files To Tag BT747Main.btToolMap.toolTipText=Map BT747Main.btToolTrack.toolTipText=Trackpoints BT747Main.btToolWaypoints.toolTipText=Waypoints BT747Main.btToolOutputSettings.toolTipText=Output Settings BT747Main.btToolFilter.toolTipText=Filter Settings BT747Main.btToolDeviceSettings.toolTipText=Device Settings BT747Main.btToolAdvancedDevSettings.toolTipText=Advanced Device Settings BT747Main.btToolAdvFileSettings.toolTipText=Advanced File Settings BT747Main.btToolInfo.toolTipText=Info Panel TAG_EXAMPLETEMPLATE=%p%f_example%e TAG_RENAME=Rename tagged file (..._tagged.extension) TAG_INPLACE=Convert inplace (original saved as ..._original). FileTablePanel.cbTargetTemplate.toolTipText=Specifies what the path of the output file is. AdvancedFileSettingsPanel.cbAltitudeMode.toolTipText=Specifically for Google Earth: when relative tracks are shown at their altitude but may disappear underground.
Clamp to Ground makes sure that the track stays visible. AdvancedFileSettingsPanel.lbAltitudeMode.text=Altitude Mode : AdvancedFileSettingsPanel.pnKMLFileSettings.toolTipText=KML/KMZ output specific settings. AdvancedFileSettingsPanel.pnKMLFileSettings.border.title=KML/KMZ (Google Earth) File Settings AdvancedDeviceSettingsPanel.pnDownloadSettings.border.title=Download Settings AdvancedDeviceSettingsPanel.pnDownloadSettings.toolTipText=Advanced settings used during log download AdvancedDeviceSettingsPanel.lbChunkSize.text=Chunk size: AdvancedDeviceSettingsPanel.spChunkSize.toolTipText=The length of an individual download request. AdvancedDeviceSettingsPanel.lbChunkRequests.text=Chunk requests: AdvancedDeviceSettingsPanel.spChunkRequests.toolTipText=The number of data chunks that are requested 'ahead of time' useful for Bluetooth download with smaller chunk sizes). AdvancedDeviceSettingsPanel.lbTimeout.text=Timeout (ms): AdvancedDeviceSettingsPanel.spTimeout.toolTipText=The time in milliseconds before the response is considered as timed out. TAB_TITLE_FileName=Log File Name TAB_TITLE_StartTime=Log Start Time TAB_TITLE_EndTime=Log End Time TAB_TITLE_Color=Color for Log Tracks KML_CLAMPGROUND=Clamp To Ground KML_RELATIVE=Relative KML_ABSOLUTE=Absolute DeleteSelectedRows=Delete Selected Rows AdvancedFileSettingsPanel.cbGPXAddLink.text=Add "" or "" tags to waypoints. AdvancedFileSettingsPanel.cbGPXAddLink.toolTipText=When a waypoint is associated to a file, a "" tag will be added to the position information. AdvancedFileSettingsPanel.cbGPX_1_1.text=GPX1.1 (otherwise GPX1.0) AdvancedFileSettingsPanel.cbGPX_1_1.toolTipText=Activates GPX1.1 output.
GPX1.1 is not necessarily better than GPX1.0!!! BT747Main.miDownloadDevice.text=Device Protocol BT747Main.miDownloadDevice.toolTipText=Device Protocol BT747Main.miDownloadIBlue.toolTipText=Download from indicated devices BT747Main.DownloadSirf.text=SR BT747Main.DownloadSirf.toolTipText=Support was 'added' but not validated LogOperationsPanel.btDownload.toolTipText=Download from the devices (type defined through the Settings menu). LogOperationsPanel.btDownload.text=Download OutputSettingsPanel.txtHeight.text=Altitude AgpsPanel.agpsPanel.border.title=AGPS AgpsPanel.txtAgpsUrl.text=jTextField1 AgpsPanel.lbAgpsUrl.text=URL AgpsPanel.txtAgpsUrl.toolTipText=URL to fetch the AGPS data form.
\nYou must provide a URL that works in your browser.
\nWithout authorisation from Transystem, I will not hard code the URL.
\nExample:
\nftp://login:password@www.transystem.com.tw/MTK7d.EPO
\nLogin and password must be filled in with the correct ones.
\nNormally MTK3d.EPO, MTK7d.EPO, MTK8d.EPO and MTK14.EPO are available.\n AgpsPanel.btUploadAgpsData.text=Upload AGPS data to Device BT747Main.AgpsPanel.TabConstraints.tabTitle=AGPS LOGGER_NEEDS_FORMAT_TEXT=Your device's memory was incorrectly initialised.
To correct this an erase operation is needed.

If your GPS logger memory is filled, you may want to download the contents first. LOGGER_NEEDS_FORMAT_TITLE=Device Memory Corrupted AgpsPanel.btDownloadAgpsData.text=Download AGPS data from URL AgpsPanel.txtAgpsInfo2.text=Information regarding AGPS data AgpsPanel.txtAgpsInfo1.text=Information regarding AGPS data AGPSINFO1=AGPS data for %s blocks. From %s to %s. AGPSINFO2=Other information (exact meaning unknown): %s and %s. pts=pts BT747Main.miUsePreciseGeoid.text=Use Precise Geoid BT747Main.miPHLXProtocol.text=Holux M-1000C / GPSport 245 BT747Main.miPHLXProtocol.toolTipText=This is the new Holux protocol using PHLX NMEA. AgpsPanel.btClearAgpsData.text=Clear AGPS data OPERATION_FAILED=Operation failed. AdvancedFileSettingsPanel.cbNotApplyUTCOffsetForNMEA.text=Do not apply UTC offset LogOperationsPanel.btOSMUp.text=OSMUp LogOperationsPanel.btOSMUp.toolTipText=Convert to GPX and upload to OpenStreetMap LogOperationsPanel.btGUI.text=GUI LogOperationsPanel.btGUI.toolTipText=Convert internally (map, table) LogOperationsPanel.btOTHERFmt.text=User LogOperationsPanel.btOTHERFmt.toolTipText=Convert using user selected tool. OSM_LOGIN_AND_PASS_SET=OSM Login and Password must be set. OutputSettingsPanel.cbNewTrackWhenLogOn.text=New track when GPS logger switched on. OutputSettingsPanel.cbNewTrackWhenLogOn.toolTipText=Will create a new track if source indicates GPS logger was switched on. OutputSettingsPanel.lbNewTrackAfterDistance.text=New Track after OutputSettingsPanel.tfTrackSeparationDistance.text=0 OutputSettingsPanel.tfTrackSeparationDistance.toolTipText=Exceeding this distance between successive positions
will create a new track.
A big value is recommended
Small values (<2000m) may result in many tiny tracks.
'0' is ignored (disables split). OutputSettingsPanel.lbMetersAfter.text=meters LocServerPanel.cbServeOnConnect.text= LocServerPanel.tfFile.text= LocServerPanel.tfPeriod.text=0 LocServerPanel.tfHostname.text=localhost LocServerPanel.lbPort.toolTipText=Port number on server to connect to.Usually 80. LocServerPanel.lbPort.text=Port Number : LocServerPanel.tfPort.text=80 LocServerPanel.lbFile.toolTipText=The path on the server to send the position. Example (myLieu): setUserPosition.php LocServerPanel.lbFile.text=File Path : LocServerPanel.lbPeriod.toolTipText=The period in seconds to send the position.
A value of 300 will send the position to the server every 5 minutes. LocServerPanel.lbPeriod.text=Update Period (s) : LocServerPanel.jPanel1.toolTipText=Settings regarding the location server. LocServerPanel.jPanel1.border.title=Location Server LocServerPanel.lbHostname.toolTipText=The hostname of the server to send the current position to. LocServerPanel.lbHostname.text=Hostname : LocServerPanel.lbUsername.toolTipText=The username to login on the server. LocServerPanel.lbUsername.text=User Name : LocServerPanel.tfUsername.text= LocServerPanel.lbPassword.toolTipText=The password for the username of the server. LocServerPanel.lbPassword.text=Password : LocServerPanel.tfPassword.text= LocServerPanel.lbServeOnConnect.toolTipText=Activate serving locations (automatically when GPS is connected) LocServerPanel.lbServeOnConnect.text=Serve Locations Active : BT747Main.btToolLocServe.text= BT747Main.btToolLocServe.toolTipText=Parameters for the location server. OsmUploadDialog.lbDescription.text=Description: OsmUploadDialog.okButton.text=OK OsmUploadDialog.lbTags.text=Tags: OsmUploadDialog.lbVisibility.text=Visibility: OsmUploadDialog.cancelButton.text=Cancel private=Private (only shared as anonymous, unordered points) public=Public (shown in trace list and as anonymous, unordered points) trackable=Trackable (only shared as anonymous, ordered points with timestamps) identifiable=Identifiable (shown in trace list and as identifiable, ordered points with timestamps) OsmUploadDialog.tfDescription.toolTipText=Description for the track on OpenStreetMap OsmUploadDialog.cbVisibility.toolTipText=Visibility of the track on OpenStreetMap OsmUploadDialog.tfTags.toolTipText=Tags to associate with the track. OsmUploadDialog.lbCommaSeparated.text=(Comma separated) OsmUploadDialog.pnOsmTrackProps.border.title=OSM Track properties OsmUploadDialog.title=Upload Track to OpenStreetMap INFOLOCATIONS=Locations served: %d of which %d failed. ExternalConversionDialog.cancelButton.text=Cancel ExternalConversionDialog.okButton.text=OK ExternalConversionDialog.lbIntermediateLogFormat.text=Intermediate log format: ExternalConversionDialog.lbExtProgram.text=External program call: ExternalConversionDialog.pnExternalToolSettings.border.title=External Tool Settings MapConfigurationDialog.lbUrl.text=Url: MapConfigurationDialog.lbMaxZoomLevel.text=Maximum Zoom Level: MapConfigurationDialog.lbShortName.text=Short name: MapConfigurationDialog.okButton.text=OK MapConfigurationDialog.cancelButton.text=Cancel MapConfigurationDialog.lbYTopToBottom.text=y Top to Bottom: MapConfigurationDialog.lbTotalMapZoom.text=Total Map Zoom: MapConfigurationDialog.lbMinZoomLevel.text=Minimum Zoom Level: MapConfigurationDialog.lbXRightToLeft.text=x Right To Left: MapConfigurationDialog.pnTileSettings.border.title=Tile Url Settings LocationServerPanel.tfFile.text= LocationServerPanel.tfPassword.text= LocationServerPanel.tfUsername.text= LocationServerPanel.tfPeriod.text= LocationServerPanel.tfHostname.text= OutputSettingsPanel.lbFontScale.text=Font Scale %: OutputSettingsPanel.pnGUISettings.border.title=GUI RemoveSelectedItems=Remove Selected Items AddPosition=Add Position CommitToDisk=Commit Changes to Disk BT747Main.miPopulateSerialPorts.text=Populate Serial Port Menu BT747Main.miPopulateSerialPorts.toolTipText=Add existing ports to pull down menu. BT747Main.miFindSerialPort.text=Find serial port BT747Main.miClearCache.text=Clear Map Cache BT747Main.miClearCache.toolTipText=Empty the map cache folder BT747Main.miMapCacheDir.toolTipText=Define the location for the cached map tiles. BT747Main.miFindSerialPort.toolTipText=Try to determine the serial port (may fail) AgpsPanel.osmAccountPanel.toolTipText=Settings specific to OSM account. AgpsPanel.osmAccountPanel.border.title=OpenStreetMap Account AgpsPanel.lbLogin.text=Login: AgpsPanel.txtLogin.text=null AgpsPanel.lbPassword.text=Password: AgpsPanel.txtPassword.text=null OsmUploadDialog.pnInstructions.border.title=Instructions to upload the filtered track to Open Street Map OsmUploadDialog.lbInstructions.text=
  1. Enter the Login and Password that correspond to your www.openstreetmap.org account.
  2. Enter a Description, select the Visibility and Enter Tags for your track.
  3. Click OK to upload the track.
  4. Be patient while the track data will be converted to a GPX file with the appropriate fields and then uploaded.
BT747Main.miCycleThunderflame.text=OpenCycleMap (by Thunderflames) BT747Main.miOpenPisteMap.text=Open Piste Map (Ski / Contour) BT747Main.miDigitalGlobe.text=Digital Globe (satellite, slow) BT747Main.miCycleCloudmade.text=OpenCycleMap (by Cloudmade) AdvancedFileSettingsPanel.lbNMEAFileWPL.text=WPL AdvancedFileSettingsPanel.lbNMEAFileWPL.toolTipText=Sentence containing some waypoint information. POSTGIS_Description=PostGIS SQL Table (.postgissql) SQL_Description=SQL Table (.sql) GoogleStaticURL_Description=Google Static Map URL (.txt) (in development) BT747Main.miSkyTraqProtocol.text=SkyTraq (in development). BT747Main.miSkyTraqProtocol.toolTipText=Skytraq protocol OutputSettingsPanel.lbCode.text=Code: DIST_CALC_MODE_NONE=Use distance in log, do not calculate DIST_CALC_MODE_MISSING=When missing, calculate distance DIST_CALC_MODE_ALWAYS=Always calculate distance (override log) Skytraq=Skytraq AdvancedFileSettingsPanel.lbFieldSep.text=Field separator: AdvancedFileSettingsPanel.lbDecimalPoint.text=Decimal point: AdvancedFileSettingsPanel.lbSatInfoSeparator.text=Sat. Info separator: AdvancedFileSettingsPanel.pnCSVFileSettings.toolTipText=Settings for CSV file output only. This allows you to adjust to regional settings.
Examples:
Field separator is ',' ; Decimal point is '.' ; Sat Info Separator is ';'
0.88,8(11),0.26,#16-60-180-15;#06-70-296-29
Field separator is ';'' ; Decimal point is ',' ; Sat Info Separator is ':'
0,88;8(11);0.26;#16-60-180-15:#06-70-296-29 AdvancedFileSettingsPanel.pnCSVFileSettings.border.title=CSV File Settings BT747Main.mnDocumentationLink.text=Documentation BT747Main.ViewMenu.text=View BT747Main.cbSpeedHeightGraph.text=Speed/Height Graph (in development) OutputSettingsPanel.cbCreatMissingFields.toolTipText=Creates dummy values for certain fields if they are missing in the source input.
\nUsefull to avoid empty entries in a CSV output file for instance. OutputSettingsPanel.cbCreatMissingFields.text=Create Missing Fields BT747Main.btAutocenterMap.text=Autocenter Map OutputSettingsPanel.pnDigits.border.title=Digits OutputSettingsPanel.lbLatLonDigits.text=Lat/Lon: OutputSettingsPanel.lbHeightDigits.text=Height: OutputSettingsPanel.cbLatLonDigits.toolTipText=The number of digits to show for Latitude and Longitude fields. OutputSettingsPanel.cbHeightDigits.toolTipText=The number of digits to emit for Height values RESULT_Description=Sony-Ericsson Tracker file (.result) OutputSettingsPanel.cbAddWayPointComment.text=Add Way Point Info OutputSettingsPanel.cbLogConditions.toolTipText=Add the active log conditions
(limited to CSV). OutputSettingsPanel.cbLogConditions.text=Cond AdvancedFileSettingsPanel.cbGPXNoCommentTags.text=Do not add tags. AdvancedFileSettingsPanel.cbGPXNoSymbolTags.text=Do not add tags. PositionPopupMenu.miSetStart.text=Set as Start PositionPopupMenu.miSetEnd.text=Set as End PositionPopupMenu.miSetStart.toolTipText=Sets this position as the initial position for the filter. PositionPopupMenu.miSetEnd.toolTipText=Set this position as the last position for the filter. BT747Main.miPHLX260Protocol.text=GPSport 260 (in development) BT747Main.miOpenPisteMapNocontour.text=Open Piste Map (Ski / No contour) OutputSettingsPanel.pnAppSettings.border.title=GUI OutputSettingsPanel.pnAppSettings.AccessibleContext.accessibleName=AppSettings OutputSettingsPanel.lbFontScale1.AccessibleContext.accessibleName=Proxy enabled: OutputSettingsPanel.lbFontScale1.AccessibleContext.accessibleDescription=Enables the use of the System Proxy which fail on Ubuntu 11.10. OutputSettingsPanel.jCheckBox1.AccessibleContext.accessibleName= OutputSettingsPanel.jCheckBox1.AccessibleContext.accessibleDescription= OutputSettingsPanel.cbEnableProxy.toolTipText=Enables the use of the system proxy (to access the internet)
- enabling this may fail on Ubuntu 11.10. OutputSettingsPanel.cbEnableProxy.text=Enable proxy EXT_GPS2KML_COMMAND=C_GPS2KML.exe %f C_GPS2KML_Description=To 'C_GPS2KML' tool (installed in path) # BT747base strings: APR=APR ATM=ATM AUG=AUG Bridge=Bridge Bus\ Stop=Bus Stop ButtonStamp=ButtonStamp Click\ here=Click here Click\ on\ map\ to\ get\ position.=Click on map to get position. DAGE=DAGE DEC=DEC DGPS=DGPS DISTANCE=DISTANCE DSTA=DSTA DistanceStamp=DistanceStamp Estimated\ mode=Estimated mode FEB=FEB FRTK=FRTK Gaz\ Station=Gaz Station Go\ To=Go To HDOP=HDOP HEADING=HEADING HEIGHT=HEIGHT IDX=IDX Init=Init JAN=JAN JUL=JUL JUN=JUN LATITUDE=LATITUDE LONGITUDE=LONGITUDE Last\ click=Last click MAR=MAR MAY=MAY Manual\ input\ mode=Manual input mode MixStamp=MixStamp NOV=NOV No\ fix=No fix OCT=OCT Other=Other PPS=PPS PDOP=PDOP Parking=Parking Phone\ Booth=Phone Booth Picture=Picture Post\ Box=Post Box RCR=RCR RTK=RTK Railway=Railway Restaurant=Restaurant SEP=SEP SPEED=SPEED SPS=SPS Simulator\ mode=Simulator mode SpeedStamp=SpeedStamp TIME=TIME TimeStamp=TimeStamp Tracks=Tracks Unknown\ mode=Unknown mode VALID=VALID VDOP=VDOP View=View Voice=Voice Way\ Point=Way Point Location\ not\ found=Location\ not\ found Problem\ downloading\ AGPS\ data.=AGPS data could not be fetched from the URL.

Check that the URL is correct and can be opened in a browser.

The format of the URL can be ftp://login:passwd@siteURL.com/MTK7d.EPO
to fetch from a site

It can be
file://c:/path/MTK7d.EPO
to fetch from a local file.

Too\ many\ errors\ during\ AGPS\ upload=Too many errors found during AGPS upload.

The upload was aborted

It is recommended that you clear the AGPS data and start again. feet=feet Sun=Sun Mon=Mon Tue=Tue Wed=Wed Thu=Thu Fri=Fri Sat=Sat Sunday=Sunday Monday=Monday Tuesday=Tuesday Wednesday=Wednesday Thursday=Thursday Friday=Friday Saturday=Saturday January=January February=February March=March April=April May=May June=June July=July August=August September=September October=October November=November December=December